There is really nothing new about cracking safes. This activity has been around for quite some time. This post is meant to offer a rather comprehensive understanding of the safecracking profession to the public. Opening safes without a key or safe cracking are normally the concern of locksmiths and burglars.

Thieves are definitely interested with it for apparent reasons, yet you may ask why would a locksmith be eager to know about safe cracking? There are several genuine reasons why a safe needs to be cracked. These include loss of keys or combinations, fires, safe lock malfunctions and also unauthorized attempts to break into safes by burglars. Irrespective of the reason why one needs to open a safe, we shall make an effort to shed some light on a couple of safe opening techniques. Thanks to Fountain Hills Locksmith Pros for some information on this subject.

Methods of opening a safe without a key

Safe1Disclaimer: We shall not reveal any sensitive information that may expose safe owners to the risk of safe cracking. We are simply investigating the different ways used in safe opening that are usually employed by safe experts and burglars.

Scoping the safe

This is the process of drilling a hole into the safe then subsequently pushing an expensive specialized borescope right into the hole so as to get a detailed look into a particular part of the safe. When glass re-lockers or manipulation resistant locks are employed then scoping is the most effective option available. One common method is widely known as “scoping the change keyhole.” In this method, you need to drill a hole to allow you to insert your scope into a spot where you can easy view the change key hole. When spinning the safe dial and routinely peeping through the change key hole for particular landmarks present on the combination lock’s wheel pack part, it could be possible to acquire the correct combination then easily dial open the security container. Safe technicians normally prefer this method since it doesn’t damage the lock, and also minor repairs are required to restore the safe back into its normal working condition.

Drilling the safe

Drilling a safeThis method is pretty much common among most safe technician experts. If the safe is highly equipped with manipulation resistant locks or electronic locks, drilling could be the only feasible method of entry. This method also requires vast knowledge about the lock and also safe being compromised. The idea is to create a tiny hole that would enable the safe to be unlocked by the use of a precision instrument that is pushed through the hole, or can as well serve as an opening to visually obtain knowledge on how exactly one should correctly dial the mechanical safe to eventually open it.

While this method may seem easy, it has many obstacles. Numerous high-security safes utilize barrier materials or hard plates that consume an entire bag of drills in a short time. Specialty drilling methods are needed to breach the barriers and hard plates, but it requires knowledge of the container and lock as well. Drilling is an ordinary effective commercial technique of opening safes since simple repairs can easily be made to restore the safe and lock back to their original form.

Prying open the safe

This is one common and old technique that happens to be the least effective while attempting to break into a safe. From my own experience, this is the most conventional method utilized by burglars. Nearly all prying attempts occasionally fail to gain access to a robust safe. Although if it eventually works, it is as easy as prying out a bolt from a door frame. With enough time, energy and strength, any safe could ultimately be compromised, but burglars hardly have enough time to successfully do so.

Cutting your way into the safe

Cutting into a safeCutting into a safe, whether by using a saw or torching it, is certainly the most utilized technique employed by professional burglars. On rare occasions, it is also an approach that professional locksmiths utilize. While it is a flawless way to break into a safe, it is quite time-consuming, leaves behind a huge mess and is also noisy. Plenty of modern top security safes comprise of a composite barrier that has a layer of copper plate which disperses the heat produced by a torch in order to stall the attack.

Safe Manipulation

This is the process of learning safe combination patterns by means of touching the safe or through sounds at certain processes. As a result of manufacturing variations and tolerances plenty of safe locks shall offer physical resistance or give off a very discreet sound once the wheels are dialed in an unusual way. This particular method requires deep knowledge about the lock under manipulation, experience and also patience, therefore, it is commonly used by the most experienced safe unlockers.Some safe technicians utilize stethoscopes in order to amplify the indistinct sounds of the lock to help during the process as commonly portrayed in movies. This safe cracking method is one of the most admired since it doesn’t leave any trace behind and also leaves the safe as if it were untouched.