You might have been in a situation where the ignition of your car is not working or responding. Whether you are using the key-ignition or the electric ignition, it can still have some problem. So what are the common car ignition problems, and what are the causes?
AZ Ignition Repair in Pheonix, AZ

• The wrong key is stuck into the keyway

When a wrong key has been inserted in the ignition, it will get stuck and might not come out easily. The best thing to do here is to call a locksmith to remove the key correctly. If you try to pull out the key, it might damage the keyway. When the ignition is damaged, the car might never start again. So you will need to contact a locksmith whenever you’re a key is stuck in the ignition.

• Faulty part

The ignition might fail to start, due to an issue with the manufacturer parts. If the part is faulty, it might break down and affect the entire ignition system. This will then affect the car, and it might not start. If the car or the parts are under warranty of the manufacturer, you can have it replaced immediately. Nonetheless, if there is no warranty, you might want to contact an automotive locksmith to fix the error.

• Attempted theft

car theftA thief might tamper with the ignition system when they attempt to steal the car. The thief might not understand how the ignition system works. As a result, they might end up messing with the system. In such cases, you might be forced to change the lock and install a new ignition.

• Spark plug issue

The spark plug might not be releasing any spark. To fix this, you will need to clean up the plug using a dry cotton cloth and get rid of any dirt on it. During the rainy days, the water can be trapped in the plug. This will prevent the plug from producing any sparks. Suppose you clean the plug, and the car is still not starting, you will want to call a professional locksmith to check up the system. To avoid such situations, you will need to park the car under a shed when it is raining.

• The transponder key doesn’t communicate with the PCM

transponder keyThe security light or dreaded key malfunction will indicate when the ignition is not working. Usually, the issue here will be that the programming of the computer chip is lost. It could also mean that the computer chip is not functioning anymore. Here, you will have two alternatives; you can choose to reprogram the key system or duplicate the current cuts, or you can program a new key. This is a service that can be offered by any professional locksmith.

• A worn out key

worn out keyyWhen the key is worn out, and some materials fall off, it might not work in the ignition. It will start to less effective and finally stop working completely. Here, you will want to order for a remake of the key from the manufacturers. The manufacturer will use the factory settings to make the key to perfection.

• Jammed up or worn out wafers

Each key ignition will have several wafers that come in a set. The wafer will index with the matching cuts that are on the key. As you use the ignition over and over again, the parts will start to wear out and can be loaded with dirt. The dirt and the worn out parts will make the ignition fail. You can repair the switch without having to replace it. The service offered here will be the basic cleaning or replacing the individual wafer that is worn out.

• A heated steering column and ignition switch

You will need to check if there is any corrosion in the ignition switch. Usually, when the ignition is corroded, and you attempt to start the car, there will be resistance that will be caused. This will end up heating the system and preventing the car from starting. The solution here is to replace the ignition switch to avoid more damages.

These are the common car ignition problems that you might experience. Whichever the problem, ensure that you take immediate action to avoid serious damages to the system. If the problem seems too much complicated, you will want to contact a professional automotive locksmith to fix it. The locksmith will also give you the tips on how to take care of your ignition system.