When it comes to knowing how to prevent lock bumping, there are a few essential aspects that need to be taken into consideration. Lock bumping is a method of picking a lock cylinder by using a specially cut key and a striking device. The technique needs only a “bump key” or “999 key,” which is a standard key. The burglar can use the bump key to separate the driver pins and key pins within the lock, which allows the key to unlock the door. This whole process takes just a few seconds, and since it does not need much force, it hardly leaves any detectable evidence. In this article, you will learn about ways you can avoid lock bumping.

Now you may be wondering just how vulnerable your home or place of business is to such a technique. Well, there are easier and simpler ways to enter a building than through lock bumping. Lock bumping creates a lot of noise, as the perpetuator needs to hit the bow of the key that is inserted into the lock attached to the door. Therefore, every time the key is struck the sound is heard throughout the house or building. But, if a burglar is not concerned about making a noise, then it would be safer and simpler to just break the window using a rock or any other striking device.

Also, lock bumping is a lock picking technique, meaning that it does require a certain level of skill and practice to be able to do it effectively. If a potential burglar is motivated enough to pick locks through lock bumping, they may as well try to learn conventional picking methods. As a matter of fact, due to the noise created by bumping, it would be more wise and prudent for a perpetuator to just pick the lock, not bump it.

How to prevent Lock Bumping

Keyless Door LockWhen it comes to discussing about ways to stop lock bumping, it is important to consider a few important aspects. One of the least expensive solutions would be to have your locksmith replace all of the driver pins in existing locks with a mushroom or spooled variety. These specially built pins would allow your lock to have two different sheer lines that need to be properly aligned before your lock will open. The net result is a lock that is hard to either pick or bump.

The second and more expensive option is to replace all of your lock cylinders with high security lock cylinders. Such locks are made to make use of a key that contains a side bar. In case the side bar information does not match the original key the lock cylinder cannot turn. You can get these locks from different manufacturers. This can enhance your key control without allowing anyone to copy the key. These lock cylinders are considered to be both bump and pick proof, thereby enhancing the safety and security of your property. Thus, if you are looking to find out how to prevent lock bumping, make sure to keep the above-mentioned aspects in view.